Shelves & fitted parts
ZZM Metal shelf set for 60 gallon cabinets
$39.98
Product number ZZM-27041
- 0.6"tall outside
10 by 33 by 0.6 inches, measured outside, steel panels, one board in the box, in black.
Plan view
What fits on the floor of it
Drawn from the outside measurements we publish, with three common things outlined to the same scale. Wall thickness takes about an inch and a half off each side, so the inside is smaller than the box.
Specification
| Outside size | 10" wide × 33" deep × 0.6" high |
|---|---|
| Material | Steel |
| Colours | Black |
| Cut for | 60 gallon |
| Listed for | tools |
| Weight | 28.1 lb |
| Product number | ZZM-27041 |
Questions
Questions about ZZM shelves & fitted parts
Which ZZM shelf set fits your shed?
Match the number. The sets are cut for 37 and 57 cubic feet, for 48 cubic feet, and for the 60 gallon cabinet, and every set on this shelf lists the boxes it fits. The capacity is on your shed page too.
Do you need tools to fit a ZZM shelf set?
The plastic sets drop onto the moulded ribs with no tools. The metal sets come with screws and want a screwdriver; allow twenty minutes.
How much can you put on a ZZM shelf?
Go by the material and the span, because there is no load figure printed on the box. The metal sets are steel over a run of 33 to 51 inches; the plastic ones are thinner and suit tins, bottles and hand tools rather than a bag of cement.