By the job
ZZM lawn mower storage sheds
- 4 sizes
- 26 to 57 cubic feet
- $198.52 and up
A push mower is about twenty-two inches across the deck and needs the handle folded or the height to stand it up. The number that decides is the door opening, not the cubic feet: a pair of front doors takes a mower that a lift-up lid will not.
What to check on this one
Measure your own deck width and the height with the handle folded, then add two inches for knuckles. If you also want the fuel can in there, read the note on the shed pages first: a sealed box and a can of petrol are a combination the fire authorities have an opinion about, and it is not a combination we recommend.
The numbers under each size are the brand's own, printed as they stand. ZZM standards put the ground before the volume.
Questions
Questions about ZZM lawn mower storage sheds
How long does a ZZM shed take you to put together?
The mid-size resin boxes come out at about two hours for one person with an electric screwdriver, which is the figure the assembly notes give. The walk-ins are a two-person job: the wall panels are six feet and awkward rather than heavy.
Will a ZZM shed take your lawn mower?
It depends on the door opening, not the cubic feet. Front-door sizes take a push mower with the handle folded; a lift-up lid will not. Measure your deck width, usually about 22 inches, and check it against the opening on the page.
Can you store fuel or a propane cylinder in a ZZM shed?
Treat it as no. Gasoline and diesel are ignitible liquids with their own national rules about approved containers and quantities, and propane has a separate limit again. Tools, furniture, bins and lawn chemicals in their original labelled containers are what a box like this is for: and the chemicals want to be away from the mower rather than beside it.